1 / 2
Qidi Plus 4 aftermarket camera mount (only works with lid risers) — zdjęcie 1
1 / 2

Qidi Plus 4 aftermarket camera mount (only works with lid risers)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I bought the creality camera and replaced the stock version so that i could have night vision. This is how I mounted it.

Ocena
0 / 5
Polubienia
12
Pobrania
32
Wydruki
0
Wyświetlenia
715
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I didn't like the stock camera, so I removed it and replaced it with  Creality 3d printing camera with NIGHT VISION, so that I can secretly spy on my printer with the lights off, and my wife won't know I'm watching prints in bed since all the lights are OFF.

This is how I mounted it, I used a countersunk ¼" 20 TPI screw, ¼" long. which feels weird because all the other screws in the machine are metric. but Creality's camera mount thread is imperial so… go Liberia!.

It only works with a lid riser you need the lid riser if you want to put the camera in the same location anyways, otherwise the toolhead will bump into the camera, which is rude.