Top mount filament support guide - Ender 3 V3 Plus (core XZ)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Top mounted filament support guide using a bearing to create smooth movement with a 160°+ pivoting angle.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 172
- Wydruki
- 0
- Wyświetlenia
- 996
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Standard Digital File License
After relocating the Filament Runout Sensor (https://makerworld.com/en/models/506459?from=search#profileId-422204), I wanted to install a different swivel mount to feed the filament to the printing head. While I liked how the Filament Runout Sensor link also contained a modified mount for the filament tube relocation, the fixed structure causes stress on certain types of filaments for tall and wide prints on the bed. I created a mount that will swivel on a bearing to eliminate additional stress on the filament. I used a 6200-ZZ Bearing (10x30x9mm) for the swivel action.
Printing information:
- 0.2mm layer, 3 walls, 15% infill
- PETG or PLA filament is recommended, but ABS or ASA can also be used.
- Rotate the main bearing to printer mount 90° to print on its side. Keep the filament to bearing mount vertical for clean holes when inserting the filament tube.
- Requires supports.
Installation:
1. Press the bearing into the main bearing to printer mount.
2. Press the filament to bearing mount into the center of the bearing.
3. To easily mount it, clip the assembled unit to the top section of the Gantry Frame Assembly to the left or right of center. Then slide the mount to the center for a tight friction fit.
4. Press the filament tube into the holder.