Creality Falcon2 Pro Material Holder V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a slider for the Creality Falcon2 Pro. It keeps your material in place.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Since most wood is warping and sometimes gets moved by the Air Assist, I tried to find a solution that works with the aluminum bars from the Falcon2 Pro.
This material holder comes with a glider and a holder. The glider slides onto two bars and can be moved out of the way if needed.
You need a M5x16 screw and bolt to keep both together. When the material is in place, you can tighten the screw with a screwdriver, and after that, the material is not moving anywhere anymore.
In this version, the bolt slides in from the side, so you can use shorter screws that don't get stuck on the drawer.