Various transparency tests with holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print these with your filaments and store for future reference
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed these models with 0,2mm and 0,15mm steps so I have reference for transparency for different types of filament and few settings.
Model filenames are self explanatory (contain first and last thickness, steps, layer height).
One is with 5x5mm squares for quite translucent filaments (or to measure against strong light)
One is for vertical/standing print position, but it starts at 0,2mm wall and has 0,1mm increments so turn on thin wall detection or use small nozzle. (maybe I redo that one later after some feedback)
Each testpiece has place for a note and 3mm hole for organizer.
Holder is for holding the test piece to have dark sorrounding so transparency comparison is observed better (see pictures).
Maybe just placebo effect for myself :)
Print holder from dark filament so it's not transparent.
Print with 100% infill.