Small Screen Sifter / Mini-Sifter with Collection Pan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small sifter for separating fines (powder, dust) from larger particles such as small pebbles, etc.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 333
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've been surprised how useful this turned out to be. It's a small simple sifter to easily separate fines from larger chunks. The collection basket retains the fines well, and the top tray gathers the larger chunks.
Flip the top over to store compactly, with the taller top part fitting into the collection basket.
There isn't much else to say… It's a sifter with an integrated collection basket. Put stuff in. Shake. Use the stuff that collected in the basket. That's all there is to it.
SUPPORTING YOUR FAVORITE DESIGNERS:
Please use affiliate links (such as ‘Filament’ below) whenever reasonable to do so. This is how one says “thanks” for the time spent making and posting designs.
BOM:
Sunlu PLA+ 2.0 (I've been loving this): https://amzn.to/4pSWLtB
Overture ABS Filament: https://amzn.to/49Yru3N
M3 screws and nuts, such as in one of these:
- Screws, Nuts and Washers (Stainless): https://amzn.to/3zxFgtM
- Screws, Nuts and Washers (or Black): https://amzn.to/3L82qJYHeavy duty window screen: https://amzn.to/407aB00
or standard duty: https://amzn.to/4aibiZb
INSTRUCTIONS:
Use a “structural” print profile, or print with 3 or more walls and 20% to 60% for best results. Supports will likely be needed.
There are ridges and grooves on the screen-facing edges to help retain the screen. Supports for these, at least around the ridges, will need to be removed. A very dull chisel or a fairly sharp flathead screwdriver can really help with this.
Once printed and cleaned of supports:
Cut a slightly oversized piece of screen.
Screw the parts together tightly around the screen, with the screws driven right through the screen.
Cut the excess screen from around it with a razor knife, assuming you used plastic screen. For metal screen, you may have to mark the pattern and cut it with tin snips.
‘Likes’, ‘Follows’ and ‘Downloads’ all help to elevate goods designs, like any other social media. If you like a thing, please click ‘like’.