1 / 4
Castle Creations 1412 Motor Lead Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cover snaps on over the exposed solder leads of a Castle 1412 sensored motor, and probably other 36mm dia. models.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This simple piece slides/snaps on over the exposed leads of the Castle Creations 1412 sensored brushless motor. It likely works on many other models with a 36mm diameter body.



I printed mine in PETG and oriented it as shown without supports on the build platform:

It is not a necessary item by any means, but it neatens up a build and prevents the ESC from being shorted by anything conductive.
Enjoy!