Tamiya TL-01 -- Body Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesigned TL-01 body mounts matching original fitment.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 381
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my redesign of the standard body mounts for a Tamiya TL-01. I designed them to fit the original mounting squares and relative post positions. They can directly replace the original Tamiya TL-01 E parts. The mounting squares are present on the TL-01 (all variants), M-03, MF-01X, and others. Note though that the width and length that these mounting squares are placed at varies between platforms.
Printing
I recommend printing these with PETG, with a layer height l ≤ 0.2mm. I print these with a 0.4mm nozzle. The mounts with a lateral shift should be printed on their side. I would suggest printing a pair of the mount you need.
Post print
After printing, the holes may need clearing out with a 1.5mm diameter drill bit to accept standard body pins. I would advise cautiouly drilling, as it is easy to snap the body mounts across layer lines in my experience.