Barient Winch Service Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some Barient winches need a hex bolt loosened. This tool locks the winch while allowing you to insert an Allen key.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Some Barient winches need a hex bolt in the center to be loosened in order to disassemble and service them.
This tool allows you to hold the winch still while allowing you to insert an Allen key to tighten or loosed the inner bolt.
For these winches, if you simply insert an Allen key to loosen the nut, you will just spin the winch. Barient apparently shipped a winch handle or some tool originally with a hole large enough for the appropriate Allen key to fit. These tools either go missing or they were just tossed.
The nominal opening is 8mm, but I opted to go to 10mm to allow some additional clearance.
I've printed the tool and used it on three winches and it works great.
Thank you for “Beoga” for his handle located here: https://www.thingiverse.com/thing:650507
Unfortunately that handle did not have a whole big enough. I took their model, brought it in Fusion 360 as a mesh, then converted the mesh to a body. Then enlarged the whole, and I'm providing the Step and STL files. Hopefully it will be helpful to someone out there.