72T Mountain Board Pully and Adapter for MBS Twistar Hub Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pully and adapter set is for the MBS "Twistar" Hub Set. the pully is 72 tooth for typical esk8 belts
- Ocena
- 0 / 5
- Polubienia
- 3
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Standard Digital File License
Hey Everyone! This pulley and adapter are specifically made to fit MBS “Twistar” Hub Set. I think it's the MBS brand low end option for mountain board wheels. I couldn't find anything else online to fit so I made these.
Pulley has 72 teeth and fits typical HTD-5M belts used for most belt driven mountain boards.
Both where printed out of ABS with 4 wall layers and 60% infill.
I rode on these on and off the road for over a year and really had no issues. They handled all the torque and rocks I could throw at them.
You'll need:
- M6 bolts 60mm long (x4 per wheel)
- M6 nuts (x4 per wheel)
- MBS "Twistar" Hub Set
- ABS or tougher