1 / 6
Filament Roll Sleeve for MK4S upgrade inside an Encloser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament Roll Sleeve for smoother filament feeding with a Prusa spool holder
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 220
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
Changed the model for the MK4s upgrade inside an encloser that the Nextruder don t hit at the Filamentroll after the MK4S upgrade .
Assemble it with the straight side to the printer as seen at the pictures. With a small Allen key between the roll sleeve and the original prusa Holder you can assemble it easier. ( Check Photos)
Printed on 0.2 mm height, 20% giyroid infill 3 Perimeters with PETG
