1 / 4
Creality Ender 3 Pro Dual Z Axis Bearing Block Assembly — zdjęcie 1
1 / 4

Creality Ender 3 Pro Dual Z Axis Bearing Block Assembly

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ender 3 Pro Dual Z drive overhead belt drive bearing block.

Ocena
0 / 5
Polubienia
14
Pobrania
36
Wydruki
0
Wyświetlenia
358
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Summary

This is a modification for the creality ender 3 dual z axis drive kit or any other dual z axis drive kit meant for the ender 3.

This kit is meant to be used to lock the lead screw in place while being driven by a belt by an overhead motor driving a synchronization belt linking the two z drive screws together.

 

Motivations

This design was instigated by the rampant z-banding issues present in most cheap bed slingers that use POM wheels for the z-axis. The cheap lead screw assembly and poor alignment often lead to heavy z-banding and gantry sag resulting in poor print quality and inconsistent z-hop.

The bearing block, with an overhead belt drive system and Oldham couplers, eliminates most problems plaguing these printer topologies, short of implementing a dual Z rail system. The overhead drive assembly ensures only two points of contact don't eh lead screw and complete stability fo the drive position fo the lead screw. No more coupler issues, no more coupler shifting, no more misalignment. All z-banding artifacts should be addressed with this drive system. (Skew will not be corrected.)

The design uses two 608 bearings to eliminate axial movement and needle thrust bearings to eliminate z axis movement to create a true bearing block for z force transmission like those found in CNC machines.

The model has been FEM verified but not creep verified. If you'd like absolute peace of mind I would recommend printing with fiber reinforced plastics as they are more resistant to creep vs regular thermoplastics. The deviation is minimal after checking FEM so it should be alright.

I tested the mode under pulley and vibration testing forces 2x those encountered in a printer running at 400m/s @ 10k acceleration for the FEM model. It will deflect below the tolerances required to maintain a 0.2mm layer height in the z axis.

 

Modifications

As always, I have included the full CAD model done in solidworks. The assembly includes genuine parts from the creality github repo so the model should be perfect and I have the mod running on my own printer and it fits well. There is some tolerance loss in the z axis height which may need to be addressed in future revisions.

The design is parametric and part-dependent. Feel free to swap out my parts for the ones you have on hand; it should automatically adjust itself. Pop into the equations tab for more modifications if you want, everything is constrained there.

I went a little overboard with the chamfers and it does look a little unprofessional due to that, please excuse this.

If you do not have Solidworks, I would recommend you look into Onshape, it is a great free alternative. It also has a modern version control system akin to GitHub. 

 

Print Settings:

  • Supports:
    • Yes
  • Resolution:
    • 0.4mm nozzle (0.45 layer width used) 
    • 0.2 mm layer height
  • Infill:
    • 40% gyroid (any isotropic pattern works)
  • Filament Material:
    • ABS, ABS+, ABS-GF, ABS-CF, PETG-GF, PETG-CF (ABS used)
  • Walls:
    • 4
  • Top and Bottom Layers
    • 5 each

This is a functional part, therefore high-strength settings have been used (4 walls, 5 top and bottom layers, 40%+ infill with isotropic shape)

 

MULTIPLE OVERHANGS PRESENT IN THIS PRINT

Your printer must be tuned for this to be printed properly.

 

Heat and creep-resistant material is recommended for this print due to the high temperatures generated in the vicinity of the printer. ABS, PETG, and the composite reinforced versions of these filaments are recommended.

ABS print speed was 200 mm/s with 250 mm/s travel. Do not enable cooling. If you print faster than this or your printer has high temperatures in the enclosure, you can adjust these settings to your printer's optimal print parameters while retaining strength and layer adhesion.

 

Post Printing:

Required Assembly Materials

2 x 608 axial bearings (sealed is better for reduced oil leakage and maintenance)

6x M3 T-nuts for securing to 2020 extrusion bracket at the top of the printer

4x Needle Thrust Bearings

2x GT2x8mm Gates pulleys

This design is meant to be used in conjunction with the Creality dual z-axis drive conversion kit as the blocks are designed to mate with the lead screw retention blocks that come with that kit.

Tagi