MiSTer Pi SNAC SNES Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for SNAC SNES board included with MiSTer Pi Batch #2
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 268
- Wydruki
- 2
- Wyświetlenia
- 1204
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
This case is for the SNES SNAC adapter that was sent out with Batch #2 of the MiSTer Pi mega-pack & turbo-pack. It has board supports, a lip to keep it from popping out the front, and snap-closure. If you use a 0.6mm nozzle, definitely use Arachne walls to get the details right for the snap-closure.
A note on assembly… To get the board through the USB port hole, the board will need to slide in under the snap connectors, but at that angle, it should be JUST enough clearance to slide in.
Edit: Increased the height of the snap connectors as people were having issues with them