Bathtub Faucet Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A plate to hide the cracked tile around the bathtub faucet.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
When I replaced my bathtub mixer valve, the pipe coming off it was corroded so much that it had practically fused with the valve. I had to use a ton of force to break it lose… and unfortunately, some of the tile near the pipe broke lose as well!
I looked for something at the store to hide the tile mess I made (the tile is so old, I couldn't find a match without custom ordering it!). So, finally, I decided to just make a cover that was custom fit to my problem!
I'm not sure if this will work for you, but it is super easy to customize and/or make so it will fit your tub/situation!
Dimensions: 130mm wide, 140mm tall, 5mm thick
I also sanded the model and sprayed it with a few coats of clear varnish to seal it (since I used PLA and it will be exposed to tons of water and moisture). Even if it doesn't last very long, it only cost me about $0.50 and a little time! Next time, I might try to find a “brushed nickel” spray paint for it so it matches my faucet better, but I'm happy with this for now.