1 / 3
Anti-vibration TPU feet for Prusa i3 MK3S
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a TPU anti-vibration foot for the Prusa i3 MK3S.
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 597
- Wydruki
- 22
- Wyświetlenia
- 2315
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 22) (Komentarze: 49)Remiksy (2)Kolekcje (109)Powiązane
This is an anti-vibration foot for the Prusa i3 MK3S. It should be printed
with TPU for best results.
You will need to print 4 of these! Support material is not needed. 20% of
infill is recommended.
This object main web page is:
http://www.ctheroux.com/anti-vibration-tpu-feet-for-prusa-i3-mk3s/.
This object was designed using Solid Edge Community Edition.
You can request the source files on the page listed above.