Low Angle Korg nanoKONTROL2 Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand that clips around the Korg nanoKONTROL2 and angles it at 10 degrees off the desktop
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple little stand, I didn't like the angle that most others put it at since I have labels on the front of the Korg that can't be read if it is angled any more. Plus using the faders at a steeper angle feels odd to me.
Placement of these doesn't really matter, as long as it feels stable to you.
The top part clips over the back of the controller, the front part slides in place along the front face instead of completely covering that edge.
I did have an issue where my controller would wobble with these installed, not sure if it's just a me problem or a common issue that will arise, I used some felt that would go under chairs to stop the wobble.
There's also enough space to run some cables underneath it, if you want to do that 🙂