Hakko arm for V3D Heat Set Insert Press
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to use the Hakko Hinge Mount with the V3D Heat Set Insert press
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
V3D has a nice improved version of Adafruit's Heat Set Insert Press:
https://www.youtube.com/watch?v=ZkJdiu_l0eo
His Github with the STLs and the list of materials is here:
https://github.com/AdamV3D/Threaded-Insert-Press/tree/main
But I had a different soldering iron than he used - a Hakko FX888. I found a holder for it here on Printables:
https://www.printables.com/model/931196-hakko-hinge-mount-for-adafruits-heat-set-insert-pr
I needed to make one change...the Hakko hinge mount didn't work with the V3D arm. So, I added an additional hole to the arm. You'll need to shave off a slight bit of the edge of the arm under the hinge - I just used a deburring tool. The original hole for his soldering iron holder is still there if you want to use that.
Note that V3D has a later version of his press which he sells on his website, but his first one is still very functional. I used parts from my old Ender 3, plus a few more bolts and things, to make it.
After I printed the Hakko hinge mount, I found my iron wiggled a little bit - a couple of pieces of black electrical tape on the inside of the holder fixed that.