Focusrite Scarlett 2i2 4th Gen Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for the Focusrite Scarlett 2i2 chassis / case.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 904
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Public Domain
The Focusrite Scarlett 2i2 4th Gen is a lovely USB audio interface with an iconic look!
However, the red metallic chassis doesn't fit in with every aesthetic around it. In my case, I was building a digital piano setup, and the original color was sticking out like a sore thumb.
Naturally, I 3D-printed a replacement for it in our beloved Prusament Galaxy Black.
If you face the same predicament, this model is for you!
I printed this on my MK4 with a 0.4 nozzle and 0.16 layer height and brim enabled, but it's not a very demanding model at all. I recommend upping your perimeter account to just avoid infill altogether, perhaps--at least that's how I did it.
Installation is easy: Remove the rear two rubber feet of the original chassis. Take the screws out. Slide off the chassis, and replace it with this one. Put the screws back. Done!