1 / 2
Toyota Tundra / Sequoia Coin Holder Cell Phone Mount — zdjęcie 1
1 / 2

Toyota Tundra / Sequoia Coin Holder Cell Phone Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This will replace your useless coin holder with a ball mount for a cell phone on Toyota Tundra and Sequoia 2WD.

Ocena
0 / 5
Polubienia
7
Pobrania
157
Wydruki
0
Wyświetlenia
1254
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

Do you have a lowly 2WD Tundra or Sequoia and want a place to put your cell phone? Look no further.  This print will allow you to rip out your boring coin holder and replace it with you desired cell phone mount in a very good location.

Required: ¼-20 bolt ¾" long OR ¼-20 nut.

NOTE: I originally designed this to use the bolt with the plastic ball mount. After about 10 months the plastic ball mount broke. I designed a new version which uses an aluminum ball. This one requires a nut instead. There is now a thinner version of the back piece to use the aluminum ball and nut.

17mm ball mount. Amazon: https://amzn.to/3CXfDnX 
17mm aluminum ball mount. Amazon: https://amzn.to/3IJPTPa

As an Amazon Associate, I earn from qualifying purchases at no additional cost to you.

Some cell phone mount, magsafe or otherwise that attaches to the 17mm ball. You can also adapt the plates to work with other mounts.

Note: There is even a slot to route your USB Type-C cable behind the dash.

Tagi