1 / 2
1.0 Inch (25.4mm) Calibration Cube with 0.5 Inch (12.7mm) Hole.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Calibration cube with a hole in it.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 695
- Wydruki
- 3
- Wyświetlenia
- 1876
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 9)Remiksy (0)Kolekcje (16)Powiązane
I wanted a calibration cube with a hole. This way you can check an inside dimension too. The cube also has radiused edges and chamfered hole on top. Bottom is flat with no radius or chamfer for better adhesion to build plate. Printed in PLA and PETG without any issues.