Ubiquiti Cloud Gateway Max/Ultra wall mount

Wall mount bracket for Ubiquity Cloud Gateway Max or Ubiquiti Cloud Ultra.

Gateway snaps into base and is held very tight. 
Exposes gateways ventilation slots.
Slot to assist with removal.  I included another model “key” that can be inserted into 
the slot, and turn ever so gently while "slightly" applying pressure on the tabs nearest the 
side with the key slot. Otherwise use a small screwdriver or other device to assist.

Link to video on Google that show how to use the mount.
https://photos.app.goo.gl/D9AnLRzLSYCFiBQo6
 

If you prefer to have a printed version of the model, please visit my Etsy store at:
  https://www.etsy.com/listing/1852748367/ubiquiti-cloud-gateway-maxultra-wall

Updated “V2.7” version available. While I did not have any problems with tabs breaking we had some users tell me that the tabs snapped.  We decided to enhance the tab strength.
Further encourage that when slicing that you add a modifier and make the tabs and the area below the tabs have a 100% infill.


Printed on MK4

Prusaslicer
  *Enable thick bridges*
  Layer Height: .20
  4 Perimeters
  15% or 20% infill (grid).  I tested successfully with 15% infill.
  No supports needed if thick bridges are enabled.

Suggest using PETG, or PLA+.  
Tabs may be brittle with older filament exposed to humidity.
 

2024-12-19: Due to some theft of my design, I am changing the license model to no longer allow remix. If you need a change, please feel free to reach out to me.