1 / 3
Sovol SV08 15mm leg risers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
just a 15mm riser for stock sovol sv08 legs
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
So i made these 15mm risers so i could do a cooling upgrade to the psu and mb of the Sovol SV08. Just something simple that can take advantage of useing the stock rubber isolators i printed them on my sv06+ out of pla.
info for print
pla
walls 3
top and bttom layer 3
infill 10% triangles
10.71g and 43min print time for all 4 (useing orca 150mms)
4x m5 x25 hardware (longer if u wanna print longer spacers)