Snapmaker 10W Laser Toolhead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3d CAD model of the toolhead for the 10W laser
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tried to create as accurate of a model as possible for building any mounts/designs around the laser toolhead. I checked the screws on the back and I think they're mostly in the right positions, if anyone has a DXF of the actual mounting holes I'd be happy to update the model.
For the bottom of the model, I actually attempted to laser cut it out (of cardboard) and it fits perfectly.
I assumed the screw holes on the top side are the same as the bottom side.
The side/top vents were just done by eye (using a canvas from a scan image).
I've included the f3d file in case you want to insert it into another model.
I've taken bits of various CAD models from the Awesome Snapmaker Repo to build this (mainly, I used the plug sketch from A350 model).