Compass for 18mm cutter blade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compass for variable distances for cutting materials using a 18mm cutter blade.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 485
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Compass for variable distances for cutting materials using a 18mm cutter blade.
Equipped with a suction cup to fix the center on which the compass fulcrum rotates.
At the end of the compass, an 18mm cutter blade must be fixed, suitably cut.
Thanks to the stop that covers the entire area, you can adjust the height of the blade before fixing it.
For the fulcrum, I used a suction cup so that I can fix the center on surfaces such as plexiglass or wood or for all those surfaces where you do not want to drill the center.
In my case, I used a suction cup with a 40mm base and a central part with a diameter of 8.5mm with a 5mm fixing hole. If you are unable to recover this suction cup, you will have to modify the compassCenter.stl file to adapt it to your suction cup.
Print information:
Material: PLA
Perimeter: 4
Infill: 50%
Resolution: 0.2
Supports: not required
Necessary parts:
N.01 Metal bar diameter 5mm for the desired length
N.02 Screw M3 X 10mm
N.02 Screw M4 X 10mm
N.01 Screw M5 X 20mm (for suction cup fixing)
N.02 Threaded inserts M3
N.02 Nut M4
N.01 Nut M5 (for suction cup fixing)
N.01 Suction cup