6mm scale Walls - Small Walls Collection 1 - BattleTech Compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original work designed to be compatible with BattleTech and other 6mm Games.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 511
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings.
My own original work designed to be compatible with BattleTech and other 6mm Games. This is nothing more than some simple hex side walls/fences. These stand ½ level high in BT terms. Use them for the Walls and Fences rules in BT Tactical Operations or whatever other purpose you need a bog standard wall for in 6mm. They should scale up pretty easily too!
This is a Work in Progress, but I successfully have printed this on a mini+.
For all of my buildings, I recommend 1.2mm wall thickness. I design them to be “acceptable” at .2mm layer height for FDM printers.
No supports needed if you've got your settings dialed in, but I always use a brim.