Mars Exploration Rover (Opportunity and Spirit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Celebrate the Mars Exploration Rovers, Spirit and Opportunity with this 3D printed model. The rover feature rolling…
- Ocena
- 0 / 5
- Polubienia
- 95
- Pobrania
- 248
- Wydruki
- 0
- Wyświetlenia
- 2658
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Celebrate the Mars Exploration Rovers, Spirit and Opportunity with this 3D printed model. The rover feature rolling wheels. pivoting suspension, and artiuclated mast cameras and antennas. The rover is also able to fold into its landing configuration.
The arm has a 8x8mm square hole for you to create your own tools for the rover to hold.
Printing Notes
Use supports for all components except for the solar panels.
I have included files for the solar panel axels, but since they are so small, pritners may have trouble pinting them accurately. 3mm metal rods work well instead.
Print one of each part except
6x tires, wheel center, outter wheel, inner wheel
2x strut pin 1, strut pin 2
3x arm knob
Several parts can be printed with color changes for more accurate colors. These parts and change z-heights are listed below:
Solar Panels 1 and 5.2mm
Camera Array- 6.6mm
Small camera- 5.6mm
Top Mast- 104.6mm
Small Antenna - 10mm
Large Antenna- 47 and 133.4mm
Sun Dial- 1.4mm
High Gain Antenna- 0.6mm
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
Yes
0.2mm
Category: 3D Printing