SpaceX Falcon Heavy Expansion Kit for Falcon 9 Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an expansion kit for my SpaceX Falcon 9 Model: https://www.printables.com/model/109824-spacex-falcon-9-model-kit
- Ocena
- 4 / 5
- Polubienia
- 163
- Pobrania
- 632
- Wydruki
- 4
- Wyświetlenia
- 6055
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an expansion kit for my SpaceX Falcon 9 Model found here: https://www.prusaprinters.org/prints/109824-spacex-falcon-9-model-kit
**Model Update: A new .stl file has been added that includes the beams that connect the boosters to the Falcon Heavy core stage. Print two of the "booster-core connector" files and use them as the top booster connections. Print two of the "booster connectors" for the bottom connections.
**Many of you asked, so here it is, the Strongback is now available here! https://www.prusaprinters.org/prints/109821-spacex-strongback
This kit allows you to build a Falcon Heavy as well as attach a Crew Dragon capsule (Dragon V2) to your model.
Instructions:
- Print a complete Falcon 9 model from the link above as well as two additional first stages (pieces 1-4, landing legs, and grid fins.
- Print 4 of the booster connectors and insert them into the 4 large holes in one of the Falcon 9 first stages. Connect the two addition first stages using the corresponding holes.
- Print 2 booster nose cones and connect these to the top of the two boosters. These use the same rotate-to-lock connectors as the interstage on the original model.
- Print the Crew Dragon capsule, trunk, and nose cone. Either the Dragon or the cargo fairings from the original model can be attached to the top of the core stage.
Print Settings
Printer:
Flashforge Creator Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2 or better
Category: 3D Printing