Super Slick Asus Zenfone 10 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the Asus Zenfone 10 with a 2 part design for no compromise on quality or printability + fully parametric CAD!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 330
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- GNU General Public License v2.0
A slick case the Asus Zenfone 10, it features a separate part for covering the camera lens for better printabilty and a modifier body you can use for customization during slicing.
The wall thickness in the model is set to 1.2mm and clearances in the model are 0.07 mm well within the capabilities of Prusa MK4. If you would like you could change them in CAD.
Printed 0.4mm nozzle at 0.15 layer height
Snug supports
Fuzzy skin at 0.3mm point distance 0.05 thickness
My preferred material for this case is ASA or PETG, 90A TPU is too soft for the thin walls IMO, will try it soon with 64D TPU.
I made the back modifier negative volume and it worked well for ASA. If you're using TPU make it something solid or high % infill
Thanks to Gideon Lorenz and Leonard Leder for creating the Zenfone9/10 models that were used for the design and sharing them on GrabCAD