Imasen 1121-491 Tail Light Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tail Light/Blinker Cover for motorcycles and heavy equipment. Replaces the IMASEN 1121-491 cover.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 872
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
The tail light covers on our compact tractor kept falling out during use and getting lost. The only info I could get was the printed “IMASEN 1121-491” on the one remaining official cover. I found nothing online except a thumbnail of an old eBay listing so I designed this to fit in the same light fixture.
Recommend printing in transparent PETG at 100% infill. You can get away with a white/light solid color filament, but the light wont be as bright coming through. Do not print with PLA. The heat from the bulb will melt it and outdoor conditions will degrade it. I didn't need supports but your experience may vary.
I included the fusion file if you want to change anything. Hopefully this will help someone.