1 / 1
Raymarine autohelm 3000 ST3000 Clutch lever
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raymarine autohelm clutch lever
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Printed this for my autohelm 3000 autopilot.
I have the lever trimmed to fit my installation.
The cog on the eccentric is just a bit bigger than module 1.25, so i used module 1.375.
You can edit the cogsize in the assembly, I use it as a cookecutter.
Reuploading my own model from thingiverse for safekeeping.