Combo Shredder A-Tech
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shredder and Pelletizer for failed prints and waste filament.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 1547
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Filament shredder and pelletizer for your poop from MMU/AMS systems, failed print thats cut to peases so it can fit in the shredder.
All tested and works quite good and did it way easyer for me wen i needed to make some shreddet filament for my ArtMe3D filament maker!
The model i mad was the drawer/bucket system so you don't have to have a bottle og something else. everyting is made to make it easyer to do the job.
HARDWARE:
There is some changes to the models named A-tech in front of the part name.
Needed hardware for A-TECH model (Drawer system and A-TECH parts:
1x Bearing for better stifness on shredder. https:https://www.amazon.co.uk/Groove-Bearing-Double-Shielded-Bearings/dp/B08DHV24MQ/?th=1
2x Plexiglass or acrylic glass cut to fit the drawer
5x M3 Heat Insert (OD5 L4)
1x Ruler thats 19x1mm (Hight and width) A-TECH Shredder Version 1 https://www.amazon.co.uk/Utoolmart-Straight-Stainless-Measuring-Hanging/dp/B08JGMBF65/ref=sr_1_33?crid=2O6BTKYA4CC8T&dib=eyJ2IjoiMSJ9.-Lu4JrpuTEwgjjcbLCnzNHCWi06s-
1x Ruler thats 18x1mm (Hight and width) A-TECH Shredder version 2
Rest of information for the Shredder and pelletizer linked TeachingTech and BuzzKillBillZ