QIDI Q1 Pro H-11 HEPA/Carbon Filter Setup

🚀 QIDI Q1 Pro HEPA/Carbon Filter Upgrade – Ultimate DIY Air Purifier Mod! 🚀

Transform your QIDI Q1 Pro into a high-performance air-filtration machine with this custom HEPA/Carbon Filter Setup. Perfect for makers who want clean, odor-free prints while protecting their workspace from harmful particles. This upgrade is engineered for versatility, ease of assembly, and enhanced airflow.

Bill of Materials (BOM):

3D Printed Parts:

• Flange (46mm and 58mm options)
• Filter Housing (Single or Dual Stack)
• Case Duct (46mm and 58mm options)
• Universal Grill (fits both stack types)

Hardware:

• Stock 60x15 Fan: 4x M3x25mm screws
• Upgraded 60x25 Fan: 4x M3x35mm screws > 

Affiliate Link: https://amzn.to/4gOXVSs

• Flange-to-Housing Assembly: 4x M3x25mm screws
• Optional Magnets: 6mm diameter, 3mm thick (up to 2 per hole)

Filters:

• Dimensions: 4.72" x 6.77" x 1.2" (Fits LEVOIT LV-H128, PUURVSAS HM669A, and ROVACS RV60 models)
• Affiliate Link https://amzn.to/4fyaO2j

⚙ How to Assemble:

1. Print the Parts:

• Use 25% infill, 4 perimeters, and ABS material (ABS-GF recommended) for durability. Print housing feet/flange down to minimize supports.

2. Choose Your Flange and Duct:

• 46mm Option: OEM placement—no modifications required.
• 58mm Option: Enlarge the fan mount location with a Dremel for improved airflow.

3. Remove the Back Panel:

• Carefully detach the back panel to access the fan mount area.

4. Assemble the Filter Housing:

• Align the Flange (46mm or 58mm) with the Filter Housing.
• Optional: Install 6mm x 3mm magnets for added security (glue recommended).
• Secure with 4x M3x25mm screws.

5. Install the Duct:

• Slide the appropriate duct from inside the chamber.
• Sandwich the duct between the exhaust fan and printer case using:
  • M3x25mm screws (Stock Fan)
  • M3x35mm screws (Upgraded Fan)

6. Reinstall the Back Panel:

• Align the duct using an Allen key or remove the mesh for direct access.
• Ensure a snug fit between the duct and Flange.

7. Insert the Filters:

• Insert compatible HEPA/Carbon filters into the housing. Use the Universal Grill to secure and protect the filters.(if the filter does not fit snug, you can use tape to wrap the perimeter to create a stronger seal )

8. Final Checks:

• Tighten all screws, check for gaps, and power on your QIDI Q1 Pro to ensure smooth airflow and proper filtration.

🌟 Why Choose This Upgrade?

• Cleaner Air: Removes harmful particles and odors from your printing environment.
• Versatile Design: Supports multiple fan and filter configurations.
• Easy to Assemble: Step-by-step instructions ensure a hassle-free installation.

🎨 Optimize Your 3D Printing Environment – Download Now and Start Printing Your Way to Clean Air! 🌬

3D printing settings

3D Printing Settings for QIDI Q1 Pro HEPA/Carbon Filter Setup

Technical Details:

• Type: FDM 3D Printing
• Material: ABS or better
• Layer Height: 0.2mm
• Infill: 25%
• Perimeters: 4
• Printing Orientation: Print the housing feet/flange down for fewer supports

Recommended Settings:

• Temperature:
  • Nozzle: 240-260°C (depending on the material)
  • Bed: 90-110°C
• Cooling: Turn off part cooling for ABS to avoid warping.
• Speed: 40-60mm/s for best quality.
• Supports: Supports may be required depending on your printer’s capabilities and part orientation.

Additional Notes:

• This setup is designed for FDM 3D printing. The use of ABS or better material is recommended to withstand the operating environment.
• Layer Height: A 0.2mm layer height is recommended for a balance between quality and speed.

Ensure you follow these settings for the best results in printing your HEPA/Carbon filter setup for the QIDI Q1 Pro.