Cozy Cabin - No AMS (or similar system) required
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cozy cabin compatible with lamp light
- Ocena
- 5 / 5
- Polubienia
- 924
- Pobrania
- 1331
- Wydruki
- 9
- Wyświetlenia
- 14 710
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This model makes use of Bambu Lab's Lamp Kit, but should accommodate any light source you have available to you
If anything could ever make you wish you could shrink down and live in a small house, this certainly would!
Light up your home with this Cozy Cabin Lamp decor!
Invite your neighbors over to look at it so they can know you're better than them! (j/k, don't do that)
A tolerance test is included so you can gauge how well tuned your printer is before starting on this model.
Assembly Instructions:
Refer to the attached guide for assembly You can also refer to this video
Printing Instructions:
Several components of this cabin utilize the "color swap" technique to mimic the capabilities of a multi-color printer. Anyone with a printer with pause capabilities can do color swaps.
There are 3mf files included that were created from Bambu Slicer that already have the settings below applied.
Roof:
Layer Height: 0.2mm
Supports: Tree/Organic supports
Cabin:
Layer Height: 0.2mm
Supports: Tree/Organic supports
Chimney Smoke: (This will make it so your smoke glows with the rest of the cabin)
Layer Height: 0.2mm
Wall generator: Arachne
Bottom shell layers: 0
Infill density: 0%
Wall loops: 1
Brim: Outer brim
Brim width: 15mm
Brim object gap: 0.1mm
Windows:
Layer Height: 0.1mm
First Layer Height: 0.1mm
Pause at Layer 3 for color swap
Pause at Layer 21 for color swap
Side Door:
Layer Height: 0.1mm
First Layer Height: 0.1mm
Pause at Layer 3 for color swap
Pause at Layer 31 for color swap
Front Door:
Layer Height: 0.2mm
Pause at Layer 29 for color swap
Porch Lattices:
Layer height: 0.2mm
Pause at Layer 3 for color swap
Everything else:
Layer Height: 0.2mm
Supports: No
Don't be afraid to give me feedback if you feel something can be improved!
For those who have joined my club at the “Obsessor” tier or have subscribed to my commercial membership on Patreon, prints of this model can be used for commercial purposes.
Feel free to join my discord for additional support, questions, or suggestions!