Low Poly Capricorn
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low Poly Capricorn as decorative sculpture with rock stand.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 341
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed it from an origami picture so that I could have a 3d printed model.
It's a little under 22cm high.
There's one Capricorn file where the feet are longer so that you just have to toggle supports on for his belly and snout. You'll have to saw or cut the integrated feet supports off.
The other one is just the Capricorn as its going to be on the rock, you can add custom supports.
There are holes where you can insert small nails to line up the rock with the capricorn to glue them together. The nails will give it extra stability.
3D printing settings
Layer Height: 0,15mm looks real nice, 0,2-0.3 will reduce printing time
Walls: 2
Infill: 30%