Wall holder resistance bands
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Wallholder for up to 10 Resistance Bands (Diameter ca. 12mm)
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 765
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Now that all the Partys and Celebrations are over, it's time to get in shape again! :)
Therefore i designed this wall Holder for my Resistance Bands i use for my fitness trainings.
The Bands are mounted on the black Nobs which keep the Handles on the bands. (See Pictures) The Diameter varys between different bands, make sure yours fit in there! The Holders are designed with 12.8mm Holes and they hold all my bands which vary in diameter from 9-14mm.
There is Place for up to 10 Bands.
I screwed them on a Woodenplate with 4mm Woodscrews. The Holes are Countersunk.
Would probably also work with some doublesided tape.
Printdetails.
Printed on my Prusa Mini.
PLA No need for Petg as there should be no force required to remove or hang them on there!
0.4 Nozzle, 0.25 Layerheight
2 Perimeters, 10% Infill
Printtime aprox 7H. Could surely be speed up by higher perimeter and infill speeds.
In the .3mf file, The Screwholes have a 100% Infill underneath so it doesn't colaps when screwed to a wall.
Happy New Year and Happy Printing!