1 / 5
Behälter für nachladbare Nikon F2 Film Kassetten; Container for refillable Nikon F2 film cassettes — zdjęcie 1
1 / 5

Behälter für nachladbare Nikon F2 Film Kassetten; Container for refillable Nikon F2 film cassettes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Behälter für nachladbare Nikon F2 Film Kassetten; Container for refillable Nikon F2 film cassettes

Ocena
0 / 5
Polubienia
1
Pobrania
32
Wydruki
0
Wyświetlenia
156
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Behälter für die wiederbefüllbaren Filmkasetten AM-1 für Nikon F2. 
Der Behälter hat das gleiche dreigängige Gewinde wie die originalen Behälter. Der Deckel bzw das Unterteil kann mit dem originalen Teil ausgetauscht werden; siehe Bilder. Falls einmal der originale Deckel kaputt geht, kann man ihn durch einen nachgedruckten ersetzen
Den Deckel gibt es in drei Ausführungen.
Gedruckt mit PLA, es empfiehlt sich den Teil mit dem Gewinde mit einer niedrigeren Schichthöhe (0,1 mm) zu drucken.
…………………….
Container for the refillable film cassettes AM-1 for Nikon F2. 
The container has the same three-start thread as the original containers. The lid or the bottom part can be replaced with the original part; see pictures. If the original lid breaks, you can replace it with a reprinted one. The lid is available in three versions. 
Printed with PLA, it is recommended to print the part with the thread with a lower layer height (0.1 mm).

Tagi