1 / 4
Upgraded filament spool holder and threaded guide — zdjęcie 1
1 / 4

Upgraded filament spool holder and threaded guide

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

6,20 € – 7,58 € netto (bez VAT)

Dla pliku: Filament Roller system plus threaded guide_0.2mm_PLA_MK3S_7h31m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 6,89 € netto (środek widełek).

Masa podana przez autora
73 g
Czas druku podany przez autora
7,52 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Includes a modified spool holder that uses 608 bearings, and a threaded spool guide to go through the Lack table.

Ocena
5 / 5
Polubienia
18
Pobrania
113
Wydruki
4
Wyświetlenia
903
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a partial remix of the spool holder and filament guide for the Ikea Lack Table design.  It includes a modified design for the spool holder that uses 608 bearings - I found the original design a bit noisy and had some spare bearings, so this is the end result.

I also wanted a threaded filament guide so I didn't have to glue the original guide in to the hole.

I printed these at 0.20 mm layer height and 20% infill.  No supports necessary.

Hope this is of help to you :)

Tagi