Creality CFS lid clip for smaller spools to prevent retraction errors (SUNLU spools and others upon request)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy clip-ons for inside the lid of a Creality CFS to push down SUNLU spools (as their diameter is slightly smaller)
- Ocena
- 5 / 5
- Polubienia
- 145
- Pobrania
- 1537
- Wydruki
- 8
- Wyświetlenia
- 3984
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
They are super easy to clip on and remove from the spring-loaded sliders inside the CFS lid.
One is with SUNLU written on the top, other one without text.
EDIT: Because of someone commenting 5mm is better than 6mm I added a 5mm version.
If you have a different brand with a different diameter, let me know so I can create one with the right thickness.
I recommend to print them using PETG (bit flexible with the clips) on a smooth build plate (less friction on the spool). Print without support needed :)
When attaching the clip, make sure it's not stuck behind the edge of the lid connection, it should move freely with the bumper on the springs.