1 / 3
Schloss Eving
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small modell of the Schloss Eving (Eving Castle) that i made for my work
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A small modell of the Schloss Eving (Eving Castle)
----PRINT----
You can print it at any size but Min. 35% Scale anything under that is possible but it will not look good.
if you print small a brim is highly recommended
Also work with Multicolor I recommend to paint the Windows and doors when you want multicolor just like in the photo but feel free to experiment
I printed it with a Prusa MK3S and a Ender 3 Neo
- For the Prusa MK3S i used the basic Quality 2,0mm setting with support in the Prusa Slicer
- For The Ender 3 Neo i used custom settings for Cura
!!! IMPORTANT SUPPORTS ARE NEEDED !!!
