1 / 1

Christmas tree with decorations / AMS not needed

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Christmas tree with decorations 2 versions

Aktualizacja u źródła: 7 gru 2024

Informacje o modelu

If you like my project, give me 👍, it will make it easier to reach others 🙂

Description:

I was inspired by a project I found on the Internet.

In my project, I made more branches, added a stand, and changed the shape of the tree.

I also added decorations.

I designed two versions of the tree.

In the first version, the lower branches have no support during printing.

In the second version, the lower branches have a support, thanks to which the lower branches come out evenly.

After printing, remove the support.

Printing:

Layer height: 0.16 mm

Number of wall: 2

The tree should be printed slowly.

We ignore warnings to turn on the supports and print without them.

I also recommend turning off the aux fan.

Leaving it on may distort the Christmas tree from the side it blows from.

On the X1 you will probably need to disable spaghetti detection.

If any branches are uneven, you can try to straighten them with a hair dryer.

Be careful not to let the temperature get too high !!!

I glued the decorations with hot glue.

Good luck and I invite you to test my other projects ;)