Plier and Cutter Holders for HSW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plier and cutters holders for Honeycomb Storage Wall
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Honeycomb storage wall holders for various sizes of pliers and cutters. Holds the tool securely at any angle, even upside down. Tool can be easily picked from the holder.
Tested on Parkside models. Likely to fit tools of other makers with similar finger guards.
There are sizes available between 25 and 39 mm (measured from the narrowest point of the grip, see image for reference) in 2 mm increments. These fit all the Parkside models I have on my tool wall. Send me a message if you'd like to have other sizes.
Uses standard hex plug which attaches to a regular Honeycomb Storage Wall insert.
Easy to print. No supports needed. I used PLA, 0.4mm nozzle, 0.2mm layer height, 2 wall loops.