Pimax Crystal (Light) or almost any VR HMD Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adaptation of my old Quest wall mount (https://www.printables.com/model/894169-quest-wallmount)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 156
- Wydruki
- 0
- Wyświetlenia
- 831
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to accommodate the depth of the Pimax Crystal (Light), but it should work for almost any HMD. (Not suitable for PSVR2 due to how the visor is attached to the halo + the facial gasket is so soft it might hit the lenses).
Spreads the weight over the facial interface. Avoids scratching/marring the plastic body.
I printed it with Overture PLA Pro. Strong settings on Bambu A1 (basically 6 walls) and it's super strong. Regular PLA would also be fine.
Because it's so tall, the outer supports will wobble a bit on a bed-slinger and print quality will suffer about an inch before they are joined together. Slowing down the print would help here, orienting the print diagonally might also reduce wobble.