Replacement Handle for Small Cheap Quick Release One-Hand Clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model for a replacement handle for those cheap quick release one-hand clamps you can get at Amazon and co.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
Some times the handles of those cheap quick release one-hand clamps from Amazon or similar warehouses wear of at the tip, that is moving the metal plates inside and then don't work well anymore.
Unscrew all screws of the housing to replace the handle, if the pin trough the handle does not fit or stay in place anymore, it can be replaced bei a M3 screw, two washers and nut.
Be sure to print this part out of a hard and sturdy material like PLA, PC or carbon- or glass-fiber enriched materials. I also recommend to print it with solid infill.