1 / 3
BentoBox V2 Fan Duct For Prusa Enclosure — zdjęcie 1
1 / 3

BentoBox V2 Fan Duct For Prusa Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of the Prusa Enclosure BentoBox V2 duct, for direct threaded M3 screws.

Ocena
0 / 5
Polubienia
10
Pobrania
37
Wydruki
0
Wyświetlenia
411
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Yet another fan duct for thrutheframe's awesome BentoBox v2.0.

Instead of relying on soldered in brass inserts (which I don't have at the moment), the M3 screws holding the fans tap directly into the model's plastic.

I recommend printing with 3 perimeters around the screw hole, to ensure the material is solid (The .3mf has this set via a height range modifier). Otherwise, stock settings are fine: 0.4mm nozzle, 0.20mm layers.

Thanks to John U for doing the hard work of remodeling the fan duct to fit the Prusa Enclosure.

Tagi