GOEWS Hanging Bed Scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A scraper that hangs from a Greatly Over-Engineered Wall System (GOEWS) hanging board
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Updates
- 2025-01-29
- reduced profile, slimmer / better edge / faster print
- recommend PETG but PLA works fine
- 2024-12-22
- sharper
- 2024-12-14
- Heard you guys liked scraping so I put some more scraper on your scraper, added additional edges to make the print more efficient
- reduced size of the not-business-end to be a little smaller and sit better adjacentto other hanging bits
- 2024-12-08
- updated geometry,
- added thumb press location
- added additional hanging configuration
- previous files located under folder “Previous”
- 2024-12-07
- Updated hook to be to spec
- Reduced size/print time
- Added separate .3mf print projects for X1C and FF ad5mpro devices
- Added .step file
- Added .stl of hook
I designed this scraper while learning to use Fusion. It is a part assembly, and the 3mf files that use a combination of infills to hopefully give the scraper plenty of durability while still being a comfortable grip and weight to keep it snug on your wall.
On the older version the edge will “sharpen up” after the first few scrapes / the first walls peel off, the newer versions have altered geometry to avoid this.
Greatly Over-Engineered Wall System (GOEWS) hanging board, available here https://makerworld.com/en/models/829453