Victorinox 84mm scales
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
84mm scales, toothpick and tweezers slot, no corkscrew cutout.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 107
- Wydruki
- 1
- Wyświetlenia
- 738
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
EDIT: Check your knife before printing! Scale have holes for only three rivets. Fits Victorinox Recruit.
Remixed from @Punkelopment.
I made these in Wood-filled PLA and fit is almost perfect. You might tweak it a little depending on material.
There are two versions of scale with logo.
One has it filled, so just print it.
Second requires insert printed beforehand and inserted mid print. This way you can make it from any material you like and just plop it in.
I printed it with inside on bed and didn't try it the other way.
Added models prepared for pocket clip. Scale with pocket clip needs reinforcement to be inserted mid print. Unless you use pretty stiff material, the clip will bend the scale away from knife. Reinforcements are not interchangeable, each one is for different scale and clip. I was able to get those laser cut. Threaded inserts I used for the clip are M3x3 from CNCkitchen and generic M3 screws. On the last pictures, the cross is filled with epoxy mixed with gitd powder.