1 / 11
Sensō-ji Hall (Asakusa, Tokyo, Japan) — zdjęcie 1
1 / 11

Sensō-ji Hall (Asakusa, Tokyo, Japan)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

🇯🇵 ⛩ Detailed model of a temple hall in Tokyo. Updated version 2024. No supports.

Ocena
4,5 / 5
Polubienia
102
Pobrania
412
Wydruki
0
Wyświetlenia
1792
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

🇯🇵 東京へようこそ! ⛩
Welcome to Tokyo!


Celebrate Ten Years of MiniWorld3D with an update to one of our first models.
 

Check out other models in this same location, like Kaminarimon and Hozomon.

⚠ - - Please read the Print Instructions further below - - ⚠
 

The Sensō-ji Hall is the main building of the Buddhist & Shinto temple grounds in the Asakusa area of Tokyo.

Dany Sánchez, MiniWorld3D founder and author of this model, visited Sensō-ji in 2015 and then published printable miniatures of the whole temple complex. Nine years later, this early model has received the Ten Anniversary treatment and has been updated with enhanced details and optimization! It can be printed large or in resin perfectly, and even in colors with MMU/AMS. The original, simpler version is here.

 

About the building:

Sensō-ji , officially Kinryū-zan Sensō-ji (金龍山浅草寺), also known as Asakusa Kannon (浅草観音)), is an ancient Buddhist temple in Asakusa, Tokyo, Japan. It is Tokyo's oldest-established temple, and one of its most significant. It is dedicated to Kannon, the bodhisattva of compassion.

Structures in the temple complex include the main hall, a five-story pagoda and large gates. It is the most widely visited religious site in the world with over 30 million visitors annually. The temple was destroyed during a 10 March 1945 firebombing air raid on Tokyo during World War II. The main hall was rebuilt in the 1950s (from Wikipedia).

MiniWorld3D is happy to bring this model to life as a homage to all the people of Japan. This model was originally designed from scratch in parametric software and updated in Tinkercad. Please give credit, it's all about spreading culture and education!

Thank you for joining our Printables Club 

printables.com/@miniworld3d

Find all our profiles, YouTube channel & social media on:

linktr.ee/miniworld3d

Join our 40K followers on IG!

instagram.com/miniworld3d
 

MiniWorld 3D is a collective of 60+ artists creating the best library of 3D printable models of landmarks of the world to spread culture and education!

Modeled by Dany Sánchez.

 

Credits: real location and print photos by Dany Sánchez in Prusa MK4 and BambuLab X1 Carbon AMS. BambuLab matte red PLA, Hand-painted details with acrylics and markers.

-----------

---PRINT INSTRUCTIONS  --------
 

  • No supports.
     
  • Lay the flat side of both parts on the print bed. The model is split in halves in order to avoid supports. Trust the overhangs and try printing it first without supports, our test printed perfectly fine without supports. 
     
  • Glue is necessary after printing for a permanent assembly. 
     
  • Sand lightly to flatten if the surfaces are not perfectly flat to each other.
     
  • At 1:1 or 100% scale, the object is it is quite small because it will fit with the larger assembly of the whole temple complex. Scale to 300% or more for standalone use, especially to showcase the full details and if using colors.
     
  • Your slicer may indicate strange surfaces or manifold errors, we have printed without issues, so please ignore that. It may be a result of Tinkercad manipulation but they are proven to print perfectly fine.
     

Suggested parameters:

Fine-tune retraction to avoid stringing.
Perimeters: 2
Top layers: 3
Infill: as low as 15%, lightning pattern ok.

Input shaper ok.

Tagi