1 / 1
Low Profile Router CR1000a Wall Mount Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D Print Low height and depth Router CR1000a Wall Mount and Bolt. Remixed from 501238-router-cr1000a-wall-stand
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 98
- Wydruki
- 1
- Wyświetlenia
- 301
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
Low profile wall mount stand for the CR1000a wifi router. The stand is 155mm deep, 80mm high and 120mm wide. The is a whole in the bottom for the M10 bolt to hold down the router. The two mounting holes are sized for #10 screws.
Recommend 0.16mm or lower layer height for the M10 bolt so the threads are not distorted.
I used 28mm layer height.