Mele Quieter ZWO AM5 TC40 Tripod mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mele Quieter 4c mini pc to ZWO AM5 TC40 Tripod mount. Quick release
- Ocena
- 4 / 5
- Polubienia
- 3
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 636
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Fits my Quieter 4c perfectly even though the original model was for 3q. Clamps to a leg on the ZWO AM5 TC40 tripod. Quick release makes it easy to remove the Qc from the rig and use it elsewhere.
Printed at 10% infill, 3 walls, in ASA. Paint some supports on the larger main piece, the smaller two parts do not need supports. I printed mine with a variable layer height in Orca. You will need some nuts and screws for the clamshell, I used 4-40 screws. I added some felt tape to the inside of the clamp to prevent any chance of scratching of the carbon fiber tripod and for tighter fit. It should clamp on to any 40 mm diameter round tube if you have something other than the ZWO TC40 tripod.
Hacked together from other models found on printables for astrophotography.
