Mini Filament Spool Rack for 150mm and 120mm Spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print two of these and connect with rods of your choosing. Two sizes for 150mm and 120mm mini spools.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I have lots of the 200g variety spools and the normal spool holders were too big. I made these specifically to fit into the Sterilite 20qt container, but they could fit others as well. I made the 120mm holder double stacked so you can have 8 spools in same footprint as 4. You will need to take one rod out to fit the 4th spool in the bottom because there isn't 120mm between the top and bottom rods. There isn't enough room in the 20qt container to make it taller without hitting bottom or lid.
Fits 8 120mm spools and 5 150mm spools.
The holes are 7.5mm and I used carbon arrow shafts. I had plenty old shafts on hand, but you can get them at Walmart for $6 or less. Cut them 220mm for the bottom rods and 230mm for the top rods. Spools go across the short side of the container.