Zuru XShot Longshot 1" Rail Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
11" long Picatinny rail to raise the height of the rail 1"
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 132
- Wydruki
- 1
- Wyświetlenia
- 967
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
11" long Picatinny rail lifted 1" from the stock XLS rail. Designed as 5 separate pieces, with the supports each being a separate piece, the rail split into two pieces for ease of print, and a printed pin to index the front with the XLS rail and prevent it from sliding off. The rails require 4x M2.6x10 screws, which are standard Nerf fare. The middle support has multiple holes to allow the user to place it wherever it might look better.
Supports are not necessary for any part, however the rail supports are best printed diagonal down, while the rails themselves and the pin should be printed flat. A horizontal expansion of -.1mm allows for friction fit with no post processing required.